Guide Band – Split 45° – TC
Installation
Vorteile
Easily manufactured to accommodate over sized conditions during rework
Very accurate and precise guidance of the cylinder components
Withstands very high side loads during operations
Maximizes efficiency of the dynamic seals
Wide temperature range
Anwendungen
The 847 Piston Series Guide Band is the ideal solutions where high side loads and deflections are present.
Typical Applications
- Leg jack cylinders
- Base lift cylinders
- Tip jack cylinders
- Face ram cylinders
- Tailgate tensioning cylinders
The 847 Piston Series Guide Band is made from MTC1, a thermoset polyester resin reinforced with a synthetic fabric.
| Material | Code |
|---|---|
| Polyester Resin Fabric | MTC1 |
| Temperature | MTC1/MTC20 °C |
°F | ||
|---|---|---|---|---|
| hydraulic oil | -40…+120 | -40…+248 | ||
| water oil emulsions (HFA) | +5…+60 | +41…+140 | ||
| water-glycol fluids (HFC) | -40…+60 | -40…+140 | ||
| polyol esters (HFD) | -40…+100 | -40…+140 | ||
| water | +5…+60 | +41…+140 | ||
| Speed | 1 m/s (3.3 ft/sec) | |||
| Load | <50 n/mm (<7250 psi) | |||
Note: for other materials or fluids please contact our engineering department.
Mehr über System Seals
Laden Sie die System Seals Broschüre für die Stahl- und Metallverarbeitende Industrie herunter und erfahren Sie mehr darüber, wie unsere selbst entwickelten Dichtungen Stahl- und Aluminiumwerken dabei helfen, durch längere Betriebszeit und höhere Produktivität Kosten in Millionenhöhe einzusparen.